MAIN

Access Control

PAS-9930PM/PE

ACCESS CONTROL

PAS Series

PAS-9930PM/PE

Standalone Access Controller

Feature:

  • Support network or standalone operation.
  • Memory capacity 1,024 cardholders / 800 events.
  • Watchdog function secures system free from halting.
  • Able to connect external slave reader type T1/T2.
  • Conditional Unlock Door function, able open 1~9,999 seconds per time.
  • Provide RS-485 communication, able expandable to 64 sets by RS-485 interface.
  • Reader tamper proof detection and door tamper alarm. Programmable door sensor detection time from 1~600 seconds and able set relay or reader beep of alarm type.
  • Slim, stylish design, sensitive touch keypad with blue backlight suit for various locations.
  • Duress card / code setting. When door opened in the emergency, controller will send signal to control center at the same time for tracing and rescue.
  • Unique ID or Block reading format supported and programmable key valu (RAC-930PM)
  • Support swipe card and card with pin codes enter modes and door relay time from 1~600 seconds.
PAS-9970PM/PE

ACCESS CONTROL

PAS Series

PAS-9970PM/PE

Standalone Access Controller

Feature:

  • Memory buffer 90% full warning.
  • Bell key design. Suit for various location.
  • Support network or standalone operation.
  • Casing tamper proof detection and door tampers alarm.
  • Support swipe card and swipe card with pin codes enter modes.
  • The memory of the standard model is 18,000 cardholders and 18,000 events.
  • Another model with 170,000 events storage is available for optional purchase.
  • Unique ID or Block read format supported. (RAC-970PM)
  • Slim, stylish design with waterproof sensitive touch keypad with blue backlight.
  • Built-in RS-485 & TCP / IP communication interface to PC. (Able to expand to 255 sets by RS-485 interface)
  • Blacklist and Duress card/code setting. When door opened in the emergency, the controller will send signal to control center at the same time for tracing and rescue.
  • Programmable disarm code and able set maximum attempts to trigger re-swip card alarm. The controller time-out function will avoid intrusion in and has self security.
  • Provide 50 sets guest card with configurable check digits, duration, usage time& frequency.
  • Provide 32 working shifts and 32 siren output. LCD will display current shift and activate alarm. Provide 100 holiday schedules per year.
  • Able to connect external slave reader, And support anti-passback to every single door.
  • Provide 128 time zones and time schedules, 8 time conditional unlock door schedules. (per week)
  • Display name on the LCD screen after swiped card. Function keys of access control and shifts which are convenient to personnel to generate time attendance reports.
  • On-board lithium battery ensures data storage can reach up to 1 year upon power outage.
PAS-9970PMF/PEF

ACCESS CONTROL

PAS Series

PAS-9970PMF/PEF

Standalone Fingerprint Access Controller

Feature:

  • Support network or standalone operation.
  • Bell key function design. Suit for various location.
  • Casing tamper proof detection and door tamper alarm.
  • Slim, stylish design, sensitive touch keypad with blue backlight.
  • Dual card / fingerprint contrast function, improve system security.
  • High security, using encryption with random code to saving finger characteristic.
  • Large LCD display time, date, weekday and company name. And show cardholder Chinese / English name, card number and after card swiped.
  • The standard model can access 950 users with 2 fingerprint templates per each user (total 1,900 ingerprint templates ). The storage event record is up to 18,000 events.
  • The advanced model can access 4,750 users with 2 fingerprint templates per each user (total 9,500 fingerprint templates). Another model with 170,000 events storage is available for optional purchase.
  • Quick and accurate fingerprint verification, supports 1:1 authentication & 1:N identification. And audible voice prompts guiding users during verification process.
  • Provide 32 working shifts and 32 siren schedules. Able display current shift or active alarm. Provide 100 holiday schedules per year.
  • Provide blacklist and 50 sets visitor card with configurable check digits, duration, usage time & frequency.
  • Provide 128 time zones and time schedules, 8 time conditional unlock door schedules (per week).
  • Duress card/code setting. When door opened in the emergency, controller will send signal to control center at the same time for tracing and rescue.
  • Programmable disarm code and max. re-swipe card alarms function. The system wills timeout at max swipe card failure.
  • Memory buffer full warning. When memory capacity reaches 90%, it will send an alarm to remind the system administrator for data collection.
  • Unique ID or Block read format supported and programmable key value. (RAC-970PMF)
  • RTC ensures to provide correct date and time. Watchdog function secures system free from halting.
  • Built-in RS-485 & TCP/IP communication interface to PC. (Able to expandable to 255 sets by RS-485 interface)
  • On-board lithium battery ensures data storage can reach up to 1 year upon power outage.
AS8625

ACCESS CONTROL

AS-86 Series

AS8625

Access Control

Feature:

Link: Standalone
Card User:
1000
Storage Code: 0
Elevator Control: 48F
Interface: RS485
Keypad: 12 Keys 
Indicators: 3 LEDs 
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8630

ACCESS CONTROL

AS-86 Series

AS8630

Access Control

Feature:

Link: Networking
Card User:
1000
Storage Code: 1000
Elevator Control: 48F
Interface: RS485
Keypad: 12 Keys 
Indicators: 3 LEDs 
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8650

ACCESS CONTROL

AS-86 Series

AS8650

Access Control

Feature:

Link: Networking
Card User:
 65535
Storage Code: 2000
Elevator Control: N/A
Interface: RS485
Keypad: 12 Keys 
Indicators: 3 LEDs 
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8680

ACCESS CONTROL

AS-86 Series

AS8680

Access Control

Feature:

Link: Networking
Card User:
 2000
Storage Code: 2000
Elevator Control: 48F
Interface: RS485
Keypad: 12 Keys 
Indicators: 3 LEDs 
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8725

ACCESS CONTROL

AS-87 Series

AS8725

Access Control

Feature:

Link: Standalone
Card User:
1000
Storage Code: 0
Elevator Control: 48F
Interface: RS485
Keypad: 13 Keys (0~9, *, #, Door Bell)
Indicators: 3 LEDs & 16 x 2 LED Display
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8730

ACCESS CONTROL

AS-87 Series

AS8730

Access Control

Feature:

Link: Networking
Card User:
1000
Storage Code: 1000
Elevator Control: 48F
Interface: RS485 
Keypad: 13 Keys (0~9, *, #, Door Bell)
Indicators: 3 LEDs & 16 x 2 LED Display
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8750

ACCESS CONTROL

AS-87 Series

AS8750

Access Control

Feature:

Link: Networking
Card User:
65535
Storage Code: 2000
Elevator Control: N/A
Interface: RS485
Keypad: 13 Keys (0~9, *, #, Door Bell)
Indicators: 3 LEDs & 16 x 2 LED Display
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8780

ACCESS CONTROL

AS-87 Series

AS8780

Access Control

Feature:

Link: Networking
Card User:
2000
Storage Code: 2000
Elevator Control: 48F
Interface: RS485
Keypad: 13 Keys (0~9, *, #, Door Bell)
Indicators: 3 LEDs & 16 x 2 LED Display
Operating Volta ge: 12-15VDC
Reader Interface: WG26 , WG34

AS8830

ACCESS CONTROL

AS-88 Series

AS8830

Access Control

Feature:

Card User: 3000
Storage Code: 16000
Elevator Control: 96F
Interface: RS485
Reader: WG26, WG34
Keypad: 16 Keys (0~9, *, #, F1~F4)
Indicators:
 6 LEDs
Operating Volta ge: 10-15VDC

AS8850

ACCESS CONTROL

AS-88 Series

AS8850

Access Control

Feature:

Card User: 3000
Storage Code: 16000
Elevator Control: 32F
Interface: RS485
Reader: WG26, WG34
Keypad: 16 Keys (0~9, *, #, F1~F4)
Indicators:
 6 LEDs
Operating Volta ge: 10-15VDC

AS8880

ACCESS CONTROL

AS-88 Series

AS8880

Access Control

Feature:

Card User: 8000
Storage Code: 32000
Holiday Setting: YES
Elevator Control: 32F
Interface: RS485
Reader: WG26, WG34
Keypad: 16 Keys (0~9, *, #, F1~F4)
Indicators:
 6 LEDs
Operating Volta ge: 10-15VDC

AS8120-S1

ACCESS CONTROL

AS-8120 Series

AS8120─S1

Access Control

Feature:

Card User: 2000
Storage Code: 12000
Individual Password: YES
Elevator Control: 48F
Interface: RS485 x 2
Keypad: 13 Keys (0~9, *, #, Door Bell)
Door Group: 15
Time Zone: 15
Indicators: 3 LEDs
Operating Volta ge: 12-15VDC

AS8120-S2

ACCESS CONTROL

AS-8120 Series

AS8120─S2

Access Control

Feature:

Card User: 65535
Storage Code: 12000
Interface: RS485 x 2
Keypad: 13 Keys (0~9, *, #, Door Bell)
Indicators: 3 LEDs
Operating Volta ge: 12-15VDC

AS8120-S3

ACCESS CONTROL

AS-8120 Series

AS8120─S3

Access Control

Feature:

Card User: 4000
Storage Code: 12000
Interface: RS485 x 2
Keypad: 13 Keys (0~9, *, #, Door Bell)
Indicators: 3 LEDs
Operating Volta ge: 12-15VDC

AS8130-S1

ACCESS CONTROL

AS-8130 Series

AS8130─S1

Access Control

Feature:

Card User: 2000
Storage Code: 32000
Individual Password: YES
Elevator Control: 48F
Interface: RS485 x 2
Reader: WG26, WG34
Keypad:
16 Keys (0~9, *, #, F1~F4)
Door Group:
15
Time Zone: 15
Indicators: 3 LEDs
Attendance Section: 8
Operating Volta ge: 12-15VDC

AS8130-S2

ACCESS CONTROL

AS-8130 Series

AS8130─S2

Access Control

Feature:

Card User: 65535
Storage Code: 32000
Interface: RS485 x 2
Reader: WG26, WG34
Keypad:
16 Keys (0~9, *, #, F1~F4)
Indicators:
3 LEDs
Attendance Section: 8
Operating Volta ge: 12-15VDC

AS8130-S3

ACCESS CONTROL

AS-8130 Series

AS8130─S3

Access Control

Feature:

Card User: 4000
Storage Code: 32000
Individual Password: YES
Interface: RS485 x 2
Reader: WG26, WG34
Keypad: 16 Keys (0~9, *, #, F1~F4)
Door Group:
15
Time Zone: 15
Indicators: 3 LEDs
Attendance Section: 8
Operating Volta ge: 12-15VDC

MAIN